Posted: 04-08-11 7:10 am
Synthesia DOS Configuration Utility v1.5.2r52 and v1.4.4r146fXP
This is a useful tool I made to backup, restore and view the configurationsettingfiles and logfiles of Synthesia, that are saved in the AppData Directory.
It is easy to use, because it is a batch-script. Every new version will be announced here.
Specifications:
- The batchfile is designed to support Vista and 7. Should also run in DOS Mode (not in an emulator)
- Synthesia should've been installed at least once (or written in the AppData directory) and it is recommended to have it closed for optimal performance
- The batchfile compiled to EXE, so I added a cool icon for it
- Built-in error-reporting, so no need to figure out what happend when something went wrong
- For the batchfile I also added some fun'n'useful stuff in the Advanced Menu
- The AutoHotkey (AHK) for Windows XP may need AutoHotkey installed. See download below.
Download:
Note This project is currently abandonned and I will restart this project later. It is very outdated and is unstable with newer versions of Windows. I will keep answering questions below though.
I've worked so long on it at debuggin', but please report any bugs (suddenly closing or getting errors). Idea's are welcome too.
Windows XP:
The Windows XP version is a compiled AutoHotkey script instead of a compiled DOS batchscriptfile. You may need AutoHotkey to run the file. (Install AutoHotkey, then you should be to open the file like normal, compile if you like). Windows Vista/7:
Download latest version below (Older downloads will be replaced if there is a more updated version available)
The ZIP file contains SynDOSCFG as a batchfile. You can open it like normal, it will open in a CMD window. Latest SynDOSCFG dev-status:
- (Nothing changed for a while...)
Upcoming features:
- (Currently none)
Source:
Even though for you is copying my code easy because it is not compiled, consider not to steal it as it is copyrighted. It is 1300 lines of code and I have put lots of effort in it.
(C) Copyright aria1121 2012 CC Creative Commons 3.0 BY-NC-ND
This is a useful tool I made to backup, restore and view the configurationsettingfiles and logfiles of Synthesia, that are saved in the AppData Directory.
It is easy to use, because it is a batch-script. Every new version will be announced here.
Specifications:
- The batchfile is designed to support Vista and 7. Should also run in DOS Mode (not in an emulator)
- Synthesia should've been installed at least once (or written in the AppData directory) and it is recommended to have it closed for optimal performance
- The batchfile compiled to EXE, so I added a cool icon for it
- Built-in error-reporting, so no need to figure out what happend when something went wrong
- For the batchfile I also added some fun'n'useful stuff in the Advanced Menu
- The AutoHotkey (AHK) for Windows XP may need AutoHotkey installed. See download below.
Download:
Note This project is currently abandonned and I will restart this project later. It is very outdated and is unstable with newer versions of Windows. I will keep answering questions below though.
I've worked so long on it at debuggin', but please report any bugs (suddenly closing or getting errors). Idea's are welcome too.
Windows XP:
The Windows XP version is a compiled AutoHotkey script instead of a compiled DOS batchscriptfile. You may need AutoHotkey to run the file. (Install AutoHotkey, then you should be to open the file like normal, compile if you like). Windows Vista/7:
Download latest version below (Older downloads will be replaced if there is a more updated version available)
The ZIP file contains SynDOSCFG as a batchfile. You can open it like normal, it will open in a CMD window. Latest SynDOSCFG dev-status:
- (Nothing changed for a while...)
Upcoming features:
- (Currently none)
Source:
Spoiler:
(C) Copyright aria1121 2012 CC Creative Commons 3.0 BY-NC-ND