Hi
I just updated Synthesia from 10.3 to 10.4 and it stopped recognizing my USB keyboard. I deleted Synthesia, installed 10.3 and this version recognizes the keyboard just fine.
OS: Windows 10
Keyboard: Korg PA300
Synthesia 10.4 does not recognize keyboard
When describing problems, always mention your OS and game version (shown at the bottom of the title screen).
If your keyboard has USB or MIDI ports, there is a tremendously high chance (>99%) it will work with Synthesia. See what you'll need on the keyboards page.
If your keyboard has USB or MIDI ports, there is a tremendously high chance (>99%) it will work with Synthesia. See what you'll need on the keyboards page.
With 10.4, does it show up if you do the following:
1. Hold your Shift key while launching Synthesia (to open the configuration window).
2. Find the "Midi.UseWinRTMidi" entry in the Setting drop-down box.
3. Remove the check mark from the "Value" box.
(Then close the configuration window and start Synthesia 10.4 normally.)
1. Hold your Shift key while launching Synthesia (to open the configuration window).
2. Find the "Midi.UseWinRTMidi" entry in the Setting drop-down box.
3. Remove the check mark from the "Value" box.
(Then close the configuration window and start Synthesia 10.4 normally.)